Tractatenblad van het Koninkrijk der Nederlanden

Datum publicatieOrganisatieJaargang en nummerRubriekDatum totstandkoming
Ministerie van Buitenlandse ZakenTractatenblad 2021, 119Verdrag

54 (1983) Nr. 15

A. TITEL

Internationaal Verdrag betreffende het geharmoniseerde systeem inzake de omschrijving en de codering van goederen (met Bijlage);

Brussel, 14 juni 1983

Voor een overzicht van de verdragsgegevens, zie verdragsnummer 000238 en 013694 in de Verdragenbank.

B. TEKST 1)

De Internationale Douaneraad heeft tijdens zijn 133ste en 134ste zitting op 28 juni 2019 overeenkomstig de procedure van artikel 16 van het Verdrag een Aanbeveling aangenomen strekkende tot het aanbrengen van bepaalde wijzigingen in de douanenomenclatuur zoals vervat in de Bijlage bij het Verdrag. In overeenstemming met de procedure van artikel 16, derde lid, van het Verdrag is deze Aanbeveling door alle Verdragsluitende Partijen aanvaard op 4 januari 2020. De Engelse tekst van de wijzigingen van de douanenomenclatuur luidt als volgt:


Amendments to the Nomenclature

TABLE OF CONTENT. SECTION III.

Delete and substitute :

“Section III

Animal, vegetable or microbial fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes

  • 15 Animal, vegetable or microbial fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes.”.

TABLE OF CONTENT. SECTION IV.

Delete and substitute :

“Section IV

Prepared foodstuffs; beverages, spirits and vinegar; tobacco and manufactured tobacco substitutes; products, whether or not containing nicotine, intended for inhalation without combustion; other nicotine containing products intended for the intake of nicotine into the human body”.

TABLE OF CONTENT. CHAPTER 16.

Delete and substitute :

  • “16 Preparations of meat, of fish, crustaceans, molluscs or other aquatic invertebrates, or of insects.”.

TABLE OF CONTENT. CHAPTER 24.

Delete and substitute :

  • “24 Tobacco and manufactured tobacco substitutes; products, whether or not containing nicotine, intended for inhalation without combustion; other nicotine containing products intended for the intake of nicotine into the human body.”.

TABLE OF CONTENT. CHAPTER 94.

Delete and substitute :

  • “94 Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; luminaires and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings.”.

CHAPTER 2.

New Note 1 (b) to Chapter 2.

Insert the following new Note 1 (b) :

  • “b) Edible, non-living insects (heading 04.10);”.

Renumber present Notes 1 (b) and 1 (c) as Notes 1 (c) and 1 (d), respectively.

CHAPTER 3.

New Note 3.

Insert the following new Note 3 :

  • “3. Headings 03.05 to 03.08 do not cover flours, meals and pellets, fit for human consumption (heading 03.09).”.

Subheading 0302.3.

Delete and substitute :

- Tunas (of the genus Thunnus), skipjack tuna (stripe-bellied bonito) (Katsuwonus pelamis), excluding edible fish offal of subheadings 0302.91 to 0302.99 :”.

Subheading 0302.33.

Delete and substitute :

“0302.33

-- Skipjack tuna (stripe-bellied bonito) (Katsuwonus pelamis)”.

Subheading 0302.55.

Delete and substitute :

“0302.55

-- Alaska Pollock (Theragra chalcogramma)”.

Subheading 0303.4.

Delete and substitute :

- Tunas (of the genus Thunnus), skipjack tuna (stripe-bellied bonito) (Katsuwonus pelamis), excluding edible fish offal of subheadings 0303.91 to 0303.99 :”.

Subheading 0303.43.

Delete and substitute :

“0303.43

-- Skipjack tuna (stripe-bellied bonito) (Katsuwonus pelamis)”.

Subheading 0303.67.

Delete and substitute :

“0303.67

-- Alaska Pollock (Theragra chalcogramma)”.

Subheading 0304.75.

Delete and substitute :

“0304.75

-- Alaska Pollock (Theragra chalcogramma)”.

Subheading 0304.87.

Delete and substitute :

“0304.87

-- Tunas (of the genus Thunnus), skipjack tuna (stripe-bellied bonito) (Katsuwonus pelamis)”.

Subheading 0304.94.

Delete and substitute :

“0304.94

-- Alaska Pollock (Theragra chalcogramma)”.

Subheading 0304.95.

Delete and substitute :

“0304.95

-- Fish of the families Bregmacerotidae, Euclichthyidae, Gadidae, Macrouridae, Melanonidae, Merlucciidae, Moridae and Muraenolepididae, other than Alaska Pollock (Theragra chalcogramma)”.

Heading 03.05. Heading text.

Delete and substitute :

03.05

Fish, dried, salted or in brine; smoked fish, whether or not cooked before or during the smoking process.”.

Subheading 0305.10.

Delete this subheading.

Heading 03.06. Heading text.

Delete and substitute :

03.06

Crustaceans, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; smoked crustaceans, whether in shell or not, whether or not cooked before or during the smoking process; crustaceans, in shell, cooked by steaming or by boiling in water, whether or not chilled, frozen, dried, salted or in brine.”.

Subheading 0306.19.

Delete and substitute :

“0306.19

-- Other”.

Subheading 0306.39.

Delete and substitute :

“0306.39

-- Other”.

Subheading 0306.99.

Delete and substitute :

“0306.99

-- Other”.

Heading 03.07. Heading text.

Delete and substitute :

03.07

Molluscs, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; smoked molluscs, whether in shell or not, whether or not cooked before or during the smoking process.”.

Subheadings 0307.2 to 0307.29.

Delete and substitute :

- Scallops and other molluscs of the family Pectinidae :

0307.21

-- Live, fresh or chilled

0307.22

-- Frozen

0307.29

-- Other”.

Subheading 0307.9.

Delete and substitute :

- Other :”.

Heading 03.08. Heading text.

Delete and substitute :

03.08

Aquatic invertebrates other than crustaceans and molluscs, live, fresh, chilled, frozen, dried, salted or in brine; smoked aquatic invertebrates other than crustaceans and molluscs, whether or not cooked before or during the smoking process.”.

New heading 03.09.

Insert the following new heading :

03.09

Flours, meals and pellets of fish, crustaceans, molluscs and other aquatic invertebrates, fit for human consumption.

0309.10

- Of fish

0309.90

- Other”.

CHAPTER 4.

New Note 2.

Insert the following new Note 2 :

  • “2. For the purposes of heading 04.03, yogurt may be concentrated or flavoured and may contain added sugar or other sweetening matter, fruit, nuts, cocoa, chocolate, spices, coffee or coffee extracts, plants, parts of plants, cereals or bakers’ wares, provided that any added substance is not used for the purpose of replacing, in whole or in part, any milk constituent, and the product retains the essential character of yogurt.”.

Renumber present Notes 2 to 4 as Notes 3 to 5 respectively.

New Note 5 (a).

Insert the following new Note 5 (a) :

  • “a) Non-living insects, unfit for human consumption (heading 05.11);”.

Renumber present Notes 4 (a) to 4 (c) (renumbered 5(a) to 5(c)) as Notes 5 (b) to 5 (d), respectively.

New Note 6.

Insert the following new Note 6 :

  • “6. For the purposes of heading 04.10, the term “insects” means edible non- living insects, whole or in parts, fresh, chilled, frozen, dried, smoked, salted or in brine, as well as flours and meals of insects, fit for human consumption. However, it does not cover edible non-living insects otherwise prepared or preserved (generally Section IV).”.

Heading 04.03. Heading text.

Delete and substitute :

04.03

Yogurt; buttermilk, curdled milk and cream, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa.”.

Subheading 0403.10.

Delete this subheading.

New subheading 0403.20.

Insert the following new subheading :

“0403.20

- Yogurt”.

Heading 04.10.

Delete and substitute :

04.10

Insects and other edible products of animal origin, not elsewhere specified or included.

0410.10

- Insects

0410.90

- Other”.

CHAPTER 7.

New Note 5.

Insert the following new Note 5 :

  • “5. Heading 07.11 applies to vegetables which have been treated solely to ensure their provisional preservation during transport or storage prior to use (for example, by sulphur dioxide gas, in brine, in sulphur water or in other preservative solutions), provided they remain unsuitable for immediate consumption in that state.”.

Subheading 0704.10.

Delete and substitute :

“0704.10

- Cauliflowers and broccoli”.

 

New subheadings 0709.52 to 0709.56.

Insert the following new subheadings :

“0709.52

-- Mushrooms of the genus Boletus

0709.53

-- Mushrooms of the genus Cantharellus

0709.54

-- Shiitake (Lentinus edodes)

0709.55

-- Matsutake (Tricholoma matsutake, Tricholoma magnivelare, Tricholoma anatolicum, Tricholoma dulciolens, Tricholoma caligatum)

0709.56

-- Truffles (Tuber spp.)”.

Heading 07.11. Heading text.

Delete and substitute :

07.11

Vegetables provisionally preserved, but unsuitable in that state for immediate consumption.”.

New subheading 0712.34.

Insert the following new subheading : “0712.34 -- Shiitake (Lentinus edodes)”.

CHAPTER 8.

New Note 4.

Insert the following new Note 4 :

  • “4. Heading 08.12 applies to fruit and nuts which have been treated solely to ensure their provisional preservation during transport or storage prior to use (for example, by sulphur dioxide gas, in brine, in sulphur water or in other preservative solutions), provided they remain unsuitable for immediate consumption in that state.”.

Subheading 0802.90.

Delete and substitute :

- Other :

0802.91

-- Pine nuts, in shell

0802.92

-- Pine nuts, shelled

0802.99

-- Other”.

Subheading 0805.40.

Delete and substitute :

“0805.40

- Grapefruit and pomelos”.

Heading 08.12. Heading text.

Delete and substitute :

08.12

Fruit and nuts provisionally preserved, but unsuitable in that state for immediate consumption.”.

CHAPTER 10.

Note 1 (B).

Delete and substitute :

  • “B) The Chapter does not cover grains which have been hulled or otherwise worked. However, rice, husked, milled, polished, glazed, parboiled or broken remains classified in heading 10.06. Similarly, quinoa from which the pericarp has been wholly or partly removed in order to separate the saponin, but which has not undergone any other processes, remains classified in heading 10.08.”.

New subheading 1211.60.

Insert the following new subheading :

“1211.60

- Bark of African cherry (Prunus africana)”.

SECTION III.

Title.

Delete and substitute :

“Animal, vegetable or microbial fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes”.

CHAPTER 15.

Title.

Delete and substitute :

“Animal, vegetable or microbial fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes”.

Chapter 15. Subheading Note.

Title.

Delete and substitute :

Subheading Notes.”.

New Subheading Note 1.

Insert the following new Subheading Note 1 :

  • “1. For the purposes of subheading 1509.30, virgin olive oil has a free acidity expressed as oleic acid not exceeding 2.0 g/ 100 g and can be distinguished from the other virgin olive oil categories according to the characteristics indicated in the Codex Alimentarius Standard 33-1981.”.

Renumber present Subheading Note 1 as Subheading Note 2.

Subheading 1509.10.

Delete and substitute :

“1509.20

- Extra virgin olive oil

1509.30

- Virgin olive oil

1509.40

- Other virgin olive oils”.

Heading 15.10.

Delete and substitute :

15.10

Other oils and their fractions, obtained solely from olives, whether or not refined, but not chemically modified, including blends of these oils or fractions with oils or fractions of heading 15.09.

1510.10

- Crude olive pomace oil

1510.90

- Other”.

Heading 15.15. Heading text.

Delete and substitute :

15.15

Other fixed vegetable or microbial fats and oils (including jojoba oil) and their fractions, whether or not refined, but not chemically modified.”.

New Subheading 1515.60.

Insert the following new subheading :

“1515.60

- Microbial fats and oils and their fractions”.

Heading 15.16. Heading text.

Delete and substitute :

15.16

Animal, vegetable or microbial fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared.”.

New Subheading 1516.30.

Insert the following new subheading :

“1516.30

- Microbial fats and oils and their fractions”.

Heading 15.17. Heading text.

Delete and substitute :

15.17

Margarine; edible mixtures or preparations of animal, vegetable or microbial fats or oils or of fractions of different fats or oils of this Chapter, other than edible fats and oils or their fractions of heading 15.16.”.

Heading 15.18.

Delete and substitute :

15.18

1518.00

Animal, vegetable or microbial fats and oils and their fractions, boiled, oxidised, dehydrated, sulphurised, blown, polymerised by heat in vacuum or in inert gas or otherwise chemically modified, excluding those of heading 15.16; inedible mixtures or preparations of animal, vegetable or microbial fats or oils or of fractions of different fats or oils of this Chapter, not elsewhere specified or included.”.

SECTION IV. Title.

Delete and substitute :

Prepared foodstuffs; beverages, spirits and vinegar; tobacco and manufactured tobacco substitutes; products, whether or not containing nicotine, intended for inhalation without combustion; other nicotine containing products intended for the intake of nicotine into the human body”.

CHAPTER 16. Title.

Delete and substitute :

Preparations of meat, of fish, crustaceans, molluscs or other aquatic invertebrates, or of insects”.

CHAPTER 16.

Note 1.

Delete and substitute :

  • “1. This Chapter does not cover meat, meat offal, fish, crustaceans, molluscs or other aquatic invertebrates, as well as insects, prepared or preserved by the processes specified in Chapter 2 or 3, Note 6 to Chapter 4 or in heading 05.04.”.

Note 2.

Delete and substitute :

  • “2. Food preparations fall in this Chapter provided that they contain more than 20 % by weight of sausage, meat, meat offal, blood, insects, fish or crustaceans, molluscs or other aquatic invertebrates, or any combination thereof. In cases where the preparation contains two or more of the products mentioned above, it is classified in the heading of Chapter 16 corresponding to the component or components which predominate by weight. These provisions do not apply to the stuffed products of heading 19.02 or to the preparations of heading 21.03 or 21.04.”.

Subheading Note 1.

Delete and substitute :

  • “1. For the purposes of subheading 1602.10, the expression “homogenised preparations” means preparations of meat, meat offal, blood or insects, finely homogenised, put up for retail sale as food suitable for infants or young children or for dietetic purposes, in containers of a net weight content not exceeding 250 g. For the application of this definition no account is to be taken of small quantities of any ingredients which may have been added to the preparation for seasoning, preservation or other purposes. These preparations may contain a small quantity of visible pieces of meat, meat offal or insects. This subheading takes precedence over all other subheadings of heading 16.02.”.

Heading 16.01.

Delete and substitute :

16.01

1601.00

Sausages and similar products, of meat, meat offal, blood or insects; food preparations based on these products.”.

Heading 16.02. Heading text.

Delete and substitute :

16.02

Other prepared or preserved meat, meat offal, blood or insects.”.

Subheading 1604.14.

Delete and substitute :

“1604.14

-- Tunas, skipjack tuna and bonito (Sarda spp.)”.

CHAPTER 18

Note 1.

Delete and substitute :

  • “1. This Chapter does not cover :

    • a) Food preparations containing more than 20 % by weight of sausage, meat, meat offal, blood, insects, fish or crustaceans, molluscs or other aquatic invertebrates, or any combination thereof (Chapter 16);

    • b) Preparations of headings 04.03, 19.01, 19.02, 19.04, 19.05, 21.05, 22.02, 22.08, 30.03 or 30.04.”.

CHAPTER 19

Note 1 (a).

Delete and substitute :

  • “a) Except in the case of stuffed products of heading 19.02, food preparations containing more than 20 % by weight of sausage, meat, meat offal, blood, insects, fish or crustaceans, molluscs or other aquatic invertebrates, or any combination thereof (Chapter 16);”.

CHAPTER 20.

New Note 1 (b).

Insert the following new Note 1 (b) :

  • “b) Vegetable fats and oils (Chapter 15);”.

Renumber current Notes 1 (b) to 1 (d) as 1 (c) to 1 (e), respectively.

CHAPTER 20

Note 1 (c).

Delete and substitute :

  • “c) Food preparations containing more than 20 % by weight of sausage, meat, meat offal, blood, insects, fish or crustaceans, molluscs or other aquatic invertebrates, or any combination thereof (Chapter 16);”.

Subheading 2008.93.

Delete and substitute :

“2008.93

-- Cranberries (Vaccinium macrocarpon, Vaccinium oxycoccos); lingonberries (Vaccinium vitis-idaea)”.

Heading 20.09. Heading text.

Delete and substitute :

20.09

Fruit or nut juices (including grape must and coconut water) and vegetable juices, unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matter.”.

Subheading 2009.2.

Delete and substitute :

- Grapefruit juice; pomelo juice :”.

Subheading 2009.8.

Delete and substitute :

- Juice of any other single fruit, nut or vegetable :”.

Subheading 2009.81.

Delete and substitute :

“2009.81

-- Cranberry (Vaccinium macrocarpon, Vaccinium oxycoccos) juice; lingonberry (Vaccinium vitis-idaea) juice”.

CHAPTER 21.

New Note 1 (f).

Insert the following new Note 1 (f) :

  • “f) Products of heading 24.04;”.

Renumber present Notes 1 (f) and 1 (g) as Notes 1 (g) and 1 (h), respectively.

Heading 22.02. Heading text.

Delete and substitute :

22.02

Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcoholic beverages, not including fruit, nut or vegetable juices of heading 20.09.”.

CHAPTER 23.

Heading 23.06. Heading text.

Delete and substitute :

23.06

Oil-cake and other solid residues, whether or not ground or in the form of pellets, resulting from the extraction of vegetable or microbial fats or oils, other than those of heading 23.04 or 23.05.”.

CHAPTER 24.

Title.

Delete and substitute :

“Tobacco and manufactured tobacco substitutes; products, whether or not containing nicotine, intended for inhalation without combustion; other nicotine containing products intended for the intake of nicotine into the human body”.

New Notes 2 and 3.

Insert the following new Notes :

  • “2. Any products classifiable in heading 24.04 and any other heading of the Chapter are to be classified in heading 24.04.

  • 3. For the purposes of heading 24.04, the expression “inhalation without combustion” means inhalation through heated delivery or other means, without combustion.”.

New heading 24.04.

Insert the following new heading 24.04 :

24.04

Products containing tobacco, reconstituted tobacco, nicotine, or tobacco or nicotine substitutes, intended for inhalation without combustion; other nicotine containing products intended for the intake of nicotine into the human body.

 

- Products intended for inhalation without combustion :

2404.11

-- Containing tobacco or reconstituted tobacco

2404.12

-- Other, containing nicotine

2404.19

-- Other

 

- Other :

2404.91

-- For oral application

2404.92

-- For transdermal application

2404.99

-- Other”.

CHAPTER 25.

New Note 2 (e).

Insert the following new Note 2 (e) :

  • “e) Dolomite ramming mix (heading 38.16);”.

Renumber present Notes 2 (e) to 2 (ij) as Notes 2 (f) to 2 (k), respectively.

Heading 25.18. Heading text.

Delete and substitute :

25.18

Dolomite, whether or not calcined or sintered, including dolomite roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape.

Subheading 2518.30.

Delete this subheading.

CHAPTER 27.

Subheading Note 5.

Delete and substitute :

  • “5. For the purposes of the subheadings of heading 27.10, the term “biodiesel” means mono-alkyl esters of fatty acids of a kind used as a fuel, derived from animal, vegetable or microbial fats and oils whether or not used.”.

SECTION VI.

New Note 4.

Insert following New Note 4 :

  • “4. Where a product answers to a description in one or more of the headings in Section VI by virtue of being described by name or function and also to heading 38.27, then it is classifiable in a heading that references the product by name or function and not under heading 38.27.”.

Subheading 2844.40.

Delete and substitute :

- Radioactive elements and isotopes and compounds other than those of subheading 2844.10, 2844.20 or 2844.30; alloys, dispersions (including cermets), ceramic products and mixtures containing these elements, isotopes or compounds; radioactive residues :

2844.41

-- Tritium and its compounds; alloys, dispersions (including cermets), ceramic products and mixtures containing tritium or its compounds

2844.42

-- Actinium-225, actinium-227, californium-253, curium-240, curium-241, curium-242, curium-243, curium-244, einsteinium-253, einsteinium-254, gadolinium-148, polonium-208, polonium-209, polonium-210, radium-223, uranium-230 or uranium-232, and their compounds; alloys, dispersions (including cermets), ceramic products and mixtures containing these elements or compounds

2844.43

-- Other radioactive elements and isotopes and compounds; other alloys, dispersions (including cermets), ceramic products and mixtures containing these elements, isotopes or compounds

2844.44

-- Radioactive residues”.

New subheadings 2845.20 to 2845.40.

Insert the following new subheadings :

“2845.20

- Boron enriched in boron-10 and its compounds

2845.30

- Lithium enriched in lithium-6 and its compounds

2845.40

- Helium-3”.

CHAPTER 29.

NOTE 1 (g).

Delete and substitute :

  • “g) The products mentioned in (a), (b), (c), (d), (e) or (f) above with an added anti-dusting agent or a colouring or odoriferous substance or an emetic added to facilitate their identification or for safety reasons, provided that the additions do not render the product particularly suitable for specific use rather than for general use;”.

Note 4. Last paragraph.

Delete and substitute :

“For the purposes of headings 29.11, 29.12, 29.14, 29.18 and 29.22, “oxygen function”, the characteristic organic oxygen-containing group of those respective headings, is restricted to the oxygen-functions referred to in headings 29.05 to 29.20.”.

Subheadings 2903.3 to 2903.39.

Delete and substitute :

- Saturated fluorinated derivatives of acyclic hydrocarbons :

2903.41

-- Trifluoromethane (HFC-23)

2903.42

-- Difluoromethane (HFC-32)

2903.43

-- Fluoromethane (HFC-41), 1,2-difluoroethane (HFC-152) and 1,1- difluoroethane (HFC-152a)

2903.44

-- Pentafluoroethane (HFC-125), 1,1,1-trifluoroethane (HFC-143a) and 1,1,2-trifluoroethane (HFC-143)

2903.45

-- 1,1,1,2-Tetrafluoroethane (HFC-134a) and 1,1,2,2- tetrafluoroethane (HFC-134)

2903.46

-- 1,1,1,2,3,3,3-Heptafluoropropane (HFC-227ea), 1,1,1,2,2,3-hexafluoropropane (HFC-236cb), 1,1,1,2,3,3-hexafluoropropane (HFC-236ea) and 1,1,1,3,3,3-hexafluoropropane (HFC-236fa)

2903.47

-- 1,1,1,3,3-Pentafluoropropane (HFC-245fa) and 1,1,2,2,3- pentafluoropropane (HFC-245ca)

2903.48

-- 1,1,1,3,3-Pentafluorobutane (HFC-365mfc) and 1,1,1,2,2,3,4,5,5,5-decafluoropentane (HFC-43-10mee)

2903.49

-- Other

 

- Unsaturated fluorinated derivatives of acyclic hydrocarbons :

2903.51

-- 2,3,3,3-Tetrafluoropropene (HFO-1234yf), 1,3,3,3-tetrafluoropropene (HFO-1234ze) and (Z)-1,1,1,4,4,4-hexafluoro- 2-butene (HFO-1336mzz)

2903.59

-- Other

 

- Brominated or iodinated derivatives of acyclic hydrocarbons :

2903.61

-- Methyl bromide (bromomethane)

2903.62

-- Ethylene dibromide (ISO) (1,2-dibromoethane)

2903.69

-- Other”.

Subheadings 2903.71 to 2903.76.

Delete and substitute :

“2903.71

-- Chlorodifluoromethane (HCFC-22)

2903.72

-- Dichlorotrifluoroethanes (HCFC-123)

2903.73

-- Dichlorofluoroethanes (HCFC-141, 141b)

2903.74

-- Chlorodifluoroethanes (HCFC-142, 142b)

2903.75

-- Dichloropentafluoropropanes (HCFC-225, 225ca, 225cb)

2903.76

-- Bromochlorodifluoromethane (Halon-1211), bromotrifluoromethane (Halon-1301) and dibromotetrafluoroethanes (Halon-2402)”.

Heading 29.09. Heading text.

Delete “ether peroxides,” and substitute “ether peroxides, acetal and hemiacetal peroxides,”.

New subheading 2930.10.

Insert the following new subheading :

“2930.10

- 2-(N,N-Dimethylamino) ethanethiol”.

Heading 29.31.

Delete and substitute :

29.31

Other organo-inorganic compounds.

2931.10

- Tetramethyl lead and tetraethyl lead

2931.20

- Tributyltin compounds

 

- Non-halogenated organo-phosphorous derivatives :

2931.41

-- Dimethyl methylphosphonate

2931.42

-- Dimethyl propylphosphonate

2931.43

-- Diethyl ethylphosphonate

2931.44

-- Methylphosphonic acid

2931.45

-- Salt of methylphosphonic acid and (aminoiminomethyl)urea (1 : 1)

2931.46

-- 2,4,6-Tripropyl-1,3,5,2,4,6-trioxatriphosphinane 2,4,6-trioxide

2931.47

-- (5-Ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl) methyl methyl methylphosphonate

2931.48

-- 3,9-Dimethyl-2,4,8,10-tetraoxa-3,9-diphosphaspiro[5.5] undecane 3,9-dioxide

2931.49

-- Other

 

- Halogenated organo-phosphorous derivatives :

2931.51

-- Methylphosphonic dichloride

2931.52

-- Propylphosphonic dichloride

2931.53

-- O-(3-chloropropyl) O-[4-nitro-3-(trifluoromethyl)phenyl] methylphosphonothionate

2931.54

-- Trichlorfon (ISO)

2931.59

-- Other

2931.90

- Other”.

New subheading 2932.96.

Insert the following new subheading :

“2932.96

-- Carbofuran (ISO)”.

Subheading 2933.33.

Delete and substitute :

“2933.33

-- Alfentanil (INN), anileridine (INN), bezitramide (INN), bromazepam (INN), carfentanil (INN), difenoxin (INN), diphenoxylate (INN), dipipanone (INN), fentanyl (INN), ketobemidone (INN), methylphenidate (INN), pentazocine (INN), pethidine (INN), pethidine (INN) intermediate A, phencyclidine (INN) (PCP), phenoperidine (INN), pipradrol (INN), piritramide (INN), propiram (INN), remifentanil (INN) and trimeperidine (INN); salts thereof”.

New subheadings 2933.34, 2933.35, 2933.36 and 2933.37.

Insert the following new subheadings :

“2933.34

-- Other fentanyls and their derivatives

2933.35

-- 3-Quinuclidinol

2933.36

-- 4-Anilino-N-phenethylpiperidine (ANPP)

2933.37

-- N-Phenethyl-4-piperidone (NPP)”.

New subheading 2934.92.

Insert the following new subheading :

“2934.9

-- Other fentanyls and their derivatives”

Subheading 2936.24.

Delete and substitute :

“2936.24

-- D- or DL-Pantothenic acid (Vitamin B5) and its derivatives”.

Subheadings 2939.4 to 2939.49.

Delete and substitute :

- Alkaloids of ephedra and their derivatives; salts thereof :

2939.41

-- Ephedrine and its salts

2939.42

-- Pseudoephedrine (INN) and its salts

2939.43

-- Cathine (INN) and its salts

2939.44

-- Norephedrine and its salts

2939.45

-- Levometamfetamine, metamfetamine (INN), metamfetamine racemate and their salts

2939.49

-- Other”.

Subheadings 2939.7 to 2939.79.

Delete and substitute :

- Other, of vegetal origin :

2939.72

-- Cocaine, ecgonine; salts, esters and other derivatives thereof

2939.79

-- Other”.

CHAPTER 30.

Note 1 (b).

Delete and substitute :

  • “b) Products, such as tablets, chewing gum or patches (transdermal systems), containing nicotine and intended to assist tobacco use cessation (heading 24.04);”.

Note 1 (g).

Delete “or” at the end of the Note.

Note 1 (h).

Delete “.” and substitute “; or”.

New Note 1 (ij).

Insert following new Note 1 (ij) :

  • “ij) Diagnostic reagents of heading 38.22.”.

Note 4 (e).

Delete and substitute :

  • “e) Placebos and blinded (or double-blinded) clinical trial kits for use in recognised clinical trials, put up in measured doses, even if they might contain active medicaments.”.

Heading 30.02. Heading text.

Delete “similar products.” and substitute “similar products; cell cultures, whether or not modified.”.

Subheading 3002.11.

Delete this subheading.

Subheading 3002.19.

Delete this subheading.

Subheadings 3002.20 and 3002.30.

Delete and substitute :

- Vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products :

3002.41

-- Vaccines for human medicine

3002.42

-- Vaccines for veterinary medicine

3002.49

-- Other”.

New subheadings 3002.5 to 3002.59.

Insert the following new subheadings 3002.5 to 3002.59 :

- Cell cultures, whether or not modified :

3002.51

-- Cell therapy products

3002.59

-- Other”.

Subheading 3006.20.

Delete this subheading.

New subheading 3006.93.

Insert the following new subheading :

“3006.93

-- Placebos and blinded (or double-blinded) clinical trial kits for a recognised clinical trial, put up in measured doses”.

New subheading 3204.18.

Insert the following new subheading :

“3204.18

-- Carotenoid colouring matters and preparations based thereon”.

CHAPTER 34.

Note 1 (a).

Delete and substitute :

  • “a) Edible mixtures or preparations of animal, vegetable or microbial fats or oils of a kind used as mould release preparations (heading 15.17);”.

Subheading 3402.1 to 3402.20.

Delete and substitute :

- Anionic organic surface active agents, whether or not put up for retail sale :

3402.31

-- Linear alkylbenzene sulphonic acids and their salts

3402.39

-- Other

 

- Other organic surface active agents, whether or not put up for retail sale :

3402.41

-- Cationic

3402.42

-- Non-ionic

3402.49

-- Other

3402.50

- Preparations put up for retail sale”.

Heading 36.03.

Delete and substitute :

36.03

Safety fuses; detonating cords; percussion or detonating caps; igniters; electric detonators.

3603.10

- Safety fuses

3603.20

- Detonating cords

3603.30

- Percussion caps

3603.40

- Detonating caps

3603.50

- Igniters

3603.60

- Electric detonators”.

CHAPTER 37.

Note 2.

Delete and substitute :

  • “2. In this Chapter the word “photographic” relates to the process by which visible images are formed, directly or indirectly, by the action of light or other forms of radiation on photosensitive, including thermosensitive, surfaces.”.

CHAPTER 38.

New Note 1 (c).

Insert the following new Note 1 (c) :

  • “c) Products of heading 24.04;”.

Renumber present Notes 1 (c) to (e) as Notes 1 (d) to (f), respectively.

Note 4 (a).

Delete and substitute :

  • “a) Individual materials or articles segregated from the waste, for example wastes of plastics, rubber, wood, paper, textiles, glass or metals, electrical and electronic waste and scrap (including spent batteries) which fall in their appropriate headings of the Nomenclature;”.

Note 7.

Delete and substitute :

  • “7. For the purposes of heading 38.26, the term “biodiesel” means mono-alkyl esters of fatty acids of a kind used as a fuel, derived from animal, vegetable or microbial fats and oils whether or not used.”.

Subheading Note 1.

Delete and substitute :

  • “1. Subheadings 3808.52 and 3808.59 cover only goods of heading 38.08, containing one or more of the following substances : alachlor (ISO); aldicarb (ISO); aldrin (ISO); azinphos-methyl (ISO); binapacryl (ISO); camphechlor (ISO) (toxaphene); captafol (ISO); carbofuran (ISO); chlordane (ISO); chlordimeform (ISO); chlorobenzilate (ISO); DDT (ISO) (clofenotane (INN), 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane); dieldrin (ISO, INN); 4,6-dinitro-o-cresol (DNOC (ISO)) or its salts; dinoseb (ISO), its salts or its esters; endosulfan (ISO); ethylene dibromide (ISO) (1,2- dibromoethane); ethylene dichloride (ISO) (1,2-dichloroethane); fluoroacetamide (ISO); heptachlor (ISO); hexachlorobenzene (ISO); 1,2,3,4,5,6-hexachlorocyclohexane (HCH (ISO)), including lindane (ISO, INN); mercury compounds; methamidophos (ISO); monocrotophos (ISO); oxirane (ethylene oxide); parathion (ISO); parathion-methyl (ISO) (methyl- parathion); pentachlorophenol (ISO), its salts or its esters; perfluorooctane sulphonic acid and its salts; perfluorooctane sulphonamides; perfluorooctane sulphonyl fluoride; phosphamidon (ISO); 2,4,5-T (ISO) (2,4,5-trichlorophenoxyacetic acid), its salts or its esters; tributyltin compounds; trichlorfon (ISO).”.

Subheading Note 3.

Delete and substitute :

  • “3. Subheadings 3824.81 to 3824.89 cover only mixtures and preparations containing one or more of the following substances : oxirane (ethylene oxide); polybrominated biphenyls (PBBs); polychlorinated biphenyls (PCBs); polychlorinated terphenyls (PCTs); tris(2,3-dibromopropyl) phosphate; aldrin (ISO); camphechlor (ISO) (toxaphene); chlordane (ISO); chlordecone (ISO); DDT (ISO) (clofenotane (INN); 1,1,1-trichloro-2,2- bis(p-chlorophenyl)ethane); dieldrin (ISO, INN); endosulfan (ISO); endrin (ISO); heptachlor (ISO); mirex (ISO); 1,2,3,4,5,6-hexachlorocyclohexane (HCH (ISO)), including lindane (ISO, INN); pentachlorobenzene (ISO); hexachlorobenzene (ISO); perfluorooctane sulphonic acid, its salts; perfluorooctane sulphonamides; perfluorooctane sulphonyl fluoride; tetra-, penta-, hexa-, hepta- or octabromodiphenyl ethers; short-chain chlorinated paraffins.

    Short-chain chlorinated paraffins are mixtures of compounds, with a chlorination degree of more than 48 % by weight, with the following molecular formula : CxH(2x-y+2)Cly, where x=10 – 13 and y= 1 – 13.”.

Heading 38.16.

Delete and substitute :

38.16

3816.00

Refractory cements, mortars, concretes and similar compositions, including dolomite ramming mix, other than products of heading 38.01.”.

Heading 38.22.

Delete and substitute :

38.22

Diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, whether or not put up in the form of kits, other than those of heading 30.06; certified reference materials.

 

- Diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, whether or not put up in the form of kits :

3822.11

-- For malaria

3822.12

-- For Zika and other diseases transmitted by mosquitoes of the genus Aedes

3822.13

-- For blood-grouping

3822.19

-- Other

3822.90

- Other”.

Subheadings 3824.7 to 3824.79.

Delete these subheadings.

Subheading 3824.88. Subheading text.

Delete “hexa- hepta-” and substitute “hexa-, hepta-”.

New subheading 3824.89.

Insert the following new subheading :

“3824.89

-- Containing short-chain chlorinated paraffins”.

New subheading 3824.92.

Insert the following new subheading :

“3824.92

-- Polyglycol esters of methylphosphonic acid”.

New heading 38.27.

Insert the following new heading :

38.27

Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included.

 

- Containing chlorofluorocarbons (CFCs), whether or not containing hydrochlorofluorocarbons (HCFCs), perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs); containing hydrobromofluorocarbons (HBFCs); containing carbon tetrachloride; containing 1,1,1- trichloroethane (methyl chloroform) :

3827.11

-- Containing chlorofluorocarbons (CFCs), whether or not containing hydrochlorofluorocarbons (HCFCs), perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs)

3827.12

-- Containing hydrobromofluorocarbons (HBFCs)

3827.13

-- Containing carbon tetrachloride

3827.14

-- Containing 1,1,1-trichloroethane (methyl chloroform)

3827.20

- Containing bromochlorodifluoromethane (Halon-1211), bromotrifluoromethane (Halon-1301) or dibromotetrafluoroethanes (Halon-2402)

 

- Containing hydrochlorofluorocarbons (HCFCs), whether or not containing perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs), but not containing chlorofluorocarbons (CFCs) :

3827.31

-- Containing substances of subheadings 2903.41 to 2903.48

3827.32

-- Other, containing substances of subheadings 2903.71 to 2903.75

3827.39

-- Other

3827.40

- Containing methyl bromide (bromomethane) or bromochloromethane

 

- Containing trifluoromethane (HFC-23) or perfluorocarbons (PFCs) but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs) :

3827.51

-- Containing trifluoromethane (HFC-23)

3827.59

-- Other

 

- Containing other hydrofluorocarbons (HFCs) but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs) :

3827.61

-- Containing 15 % or more by mass of 1,1,1-trifluoroethane (HFC-143a)

3827.62

-- Other, not included in the subheading above, containing 55 % or more by mass of pentafluoroethane (HFC- 125) but not containing unsaturated fluorinated derivatives of acyclic hydrocarbons (HFOs)

3827.63

-- Other, not included in the subheadings above, containing 40 % or more by mass of pentafluoroethane (HFC-125)

3827.64

-- Other, not included in the subheadings above, containing 30 % or more by mass of 1,1,1,2-tetrafluoroethane (HFC-134a) but not containing unsaturated fluorinated derivatives of acyclic hydrocarbons (HFOs)

3827.65

-- Other, not included in the subheadings above, containing 20 % or more by mass of difluoromethane (HFC-32) and 20 % or more by mass of pentafluoroethane (HFC-125)

3827.68

-- Other, not included in the subheadings above, containing substances of subheadings 2903.41 to 2903.48

3827.69

-- Other

3827.90

- Other”.

SECTION VII.

Note 2.

Delete and substitute :

  • “2. Except for the goods of heading 39.18 or 39.19, plastics, rubber, and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.”.

CHAPTER 39.

Note 2 (x).

Delete “lamps and lighting fittings” and substitute “luminaires and lighting fittings”.

Subheading 3907.20.

Delete and substitute :

- Other polyethers :

3907.21

-- Bis(polyoxyethylene) methylphosphonate

3907.29

-- Other”.

New subheading 3911.20.

Insert the following new subheading :

“3911.20

- Poly(1,3-phenylene methylphosphonate)”.

Subheading 4015.11.

Delete this subheading.

New subheading 4015.12.

Insert the following new subheading :

“ 4015.12

-- Of a kind used for medical, surgical, dental or veterinary purposes”.

CHAPTER 42.

Note 2 (k).

Delete “lamps and lighting fittings” and substitute “luminaires and lighting fittings”.

CHAPTER 44.

Note 1 (o).

Delete “lamps and lighting fittings” and substitute “luminaires and lighting fittings”.

Chapter 44. Subheading Note.

Title.

Delete and substitute :

Subheading Notes.”.

CHAPTER 44.

New Subheading Note 2.

Insert the following new subheading Note 2 :

  • “2. For the purposes of subheading 4401.32, the expression “wood briquettes” means by products such as cutter shavings, saw dust or chips, of the mechanical wood processing industry, furniture making or other wood transformation activities, which have been agglomerated either directly by compression or by addition of a binder in a proportion not exceeding 3 % by weight. Such briquettes are in the form of cubiform, polyhedral or cylindrical units with the minimum cross-sectional dimension greater than 25 mm.”.

CHAPTER 44.

New Subheading Notes 3 and 4.

Insert the following new Subheading Notes 3 and 4 :

  • “3. For the purposes of subheading 4407.13, “S-P-F” refers to wood sourced from mixed stands of spruce, pine and fir where the proportion of each species varies and is unknown.

  • 4. For the purposes of subheading 4407.14, “Hem-fir” refers to wood sourced from mixed stands of Western hemlock and fir where the proportion of each species varies and is unknown.”.

Subheading 4401.3. Subheading text.

Delete “agglomerated, in logs,” and substitute “agglomerated in logs,”.

New subheading 4401.32.

Insert the following new subheading :

“4401.32

-- Wood briquettes”.

Subheading 4401.40.

Delete and substitute :

- Sawdust and wood waste and scrap, not agglomerated :

4401.41

-- Sawdust

4401.49

-- Other”.

New subheading 4402.20.

Insert the following new subheading :

“4402.20

- Of shell or nut”.

Subheading 4403.21.

Delete and substitute :

“4403.21

-- Of pine (Pinus spp.), of which the smallest cross-sectional dimension is 15 cm or more”.

Subheading 4403.23.

Delete and substitute :

“4403.23

-- Of fir (Abies spp.) and spruce (Picea spp.), of which the smallest cross-sectional dimension is 15 cm or more”.

Subheading 4403.25.

Delete and substitute :

“4403.25

-- Other, of which the smallest cross-sectional dimension is 15 cm or more”.

New subheading 4403.42.

Insert the following new subheading :

“4403.42

-- Teak”.

Subheading 4403.93.

Delete and substitute :

“4403.93

-- Of beech (Fagus spp.), of which the smallest cross-sectional dimension is 15 cm or more”.

Subheading 4403.95.

Delete and substitute :

“4403.95

-- Of birch (Betula spp.), of which the smallest cross-sectional dimension is 15 cm or more”.

New Subheadings 4407.13 and 4407.14.

Insert the following new subheadings :

“4407.13

-- Of S-P-F (spruce (Picea spp.), pine (Pinus spp.) and fir (Abies spp.))

4407.14

-- Of Hem-fir (Western hemlock (Tsuga heterophylla) and fir (Abies spp.))”.

New subheading 4407.23.

Insert the following new subheading :

“4407.23

-- Teak”.

New subheadings 4412.4 to 4412.49.

Insert the following new subheadings :

- Laminated veneered lumber (LVL) :

4412.41

-- With at least one outer ply of tropical wood

4412.42

-- Other, with at least one outer ply of non-coniferous wood

4412.49

-- Other, with both outer plies of coniferous wood”.

New subheadings 4412.5 to 4412.59.

Insert the following new subheadings :

- Blockboard, laminboard and battenboard :

4412.5

-- With at least one outer ply of tropical wood

4412.52

-- Other, with at least one outer ply of non-coniferous wood

4412.59

-- Other, with both outer plies of coniferous wood”.

Subheadings 4412.9 to 4412.99.

Delete and substitute :

- Other :

4412.91

-- With at least one outer ply of tropical wood

4412.92

-- Other, with at least one outer ply of non-coniferous wood

4412.99

-- Other, with both outer plies of coniferous wood”.

Heading 44.14.

Delete and substitute :

44.14

Wooden frames for paintings, photographs, mirrors or similar objects.

4414.10

- Of tropical wood

4414.90

- Other”.

Subheading 4418.10.

Delete and substitute :

- Windows, French-windows and their frames :

4418.11

-- Of tropical wood

4418.19

-- Other”.

Subheading 4418.20.

Delete and substitute :

- Doors and their frames and thresholds :

4418.21

-- Of tropical wood

4418.29

-- Other”.

New subheading 4418.30.

Insert the following new subheading :

“4418.30

- Posts and beams other than products of subheadings 4418.81 to 4418.89”.

Subheading 4418.60.

Delete this subheading.

New subheadings 4418.8 to 4418.89.

Insert the following new subheadings :

- Engineered structural timber products :

4418.81

-- Glue-laminated timber (glulam)

4418.82

-- Cross-laminated timber (CLT or X-lam)

4418.83

-- I beams

4418.89

-- Other”.

New subheading 4418.92.

Insert the following new subheading :

“4418.92

-- Cellular wood panels”.

New Subheading 4419.20.

Insert the following new subheading :

“4419.20

- Of tropical wood”.

Subheading 4420.10.

Delete and substitute :

- Statuettes and other ornaments :

4420.11

-- Of tropical wood

4420.19

-- Other”.

New subheading 4421.20.

Insert the following new subheading :

“4421.20

- Coffins”.

CHAPTER 46.

Note 2 (e).

Delete “lamps and lighting fittings” and substitute “luminaires and lighting fittings”.

CHAPTER 48.

Note 2 (q).

Delete and substitute :

  • “q) Articles of Chapter 96 (for example, buttons, sanitary towels (pads) and tampons, napkins (diapers) and napkin liners).”.

CHAPTER 48.

Note 4.

Delete “apply” and substitute “applies” after the expression “weighing not less than 40 g/m2 and not more than 65 g/m2, and”.

CHAPTER 48.

Note 5.

Delete and substitute :

  • “5. For the purposes of heading 48.02, the expressions “paper and paperboard, of a kind used for writing, printing or other graphic purposes” and “non perforated punch-cards and punch tape paper” mean paper and paperboard made mainly from bleached pulp or from pulp obtained by a mechanical or chemi-mechanical process and satisfying any of the following criteria :

    • A) For paper or paperboard weighing not more than 150 g/m2 :

      • a) containing 10 % or more of fibres obtained by a mechanical or chemi-mechanical process, and

        • 1. weighing not more than 80 g/m2, or

        • 2. coloured throughout the mass; or

      • b) containing more than 8 % ash, and

        • 1. weighing not more than 80 g/m2, or

        • 2. coloured throughout the mass; or

      • c) containing more than 3 % ash and having a brightness of 60 % or more; or

      • d) containing more than 3 % but not more than 8 % ash, having a brightness less than 60 %, and a burst index equal to or less than 2.5 kPa•m2/g; or

      • e) e containing 3 % ash or less, having a brightness of 60 % or more and a burst index equal to or less than 2.5 kPa•m2/g.

    • B) For paper or paperboard weighing more than 150 g/m2 :

      • a) coloured throughout the mass; or

      • b) having a brightness of 60 % or more, and

        • 1. a caliper of 225 micrometres (microns) or less, or

        • 2. a caliper of more than 225 micrometres (microns) but not more than 508 micrometres (microns) and an ash content of more than 3 %; or

      • c) having a brightness of less than 60 %, a caliper of 254 micrometres (microns) or less and an ash content of more than 8 %.

    Heading 48.02 does not, however, cover filter paper or paperboard (including tea-bag paper) or felt paper or paperboard.”.

CHAPTER 48.

Note 12.

Delete and substitute :

  • “12. Except for the goods of heading 48.14 or 48.21, paper, paperboard, cellulose wadding and articles thereof, printed with motifs, characters or pictorial representations, which are not merely subsidiary to the primary use of the goods, fall in Chapter 49.”.

Subheading 4905.10.

Delete this subheading.

Subheadings 4905.9 to 4905.99.

Delete and substitute :

“4905.20

- In book form

4905.90

- Other”.

SECTION XI.

Note 1 (s).

Delete “lamps and lighting fittings” and substitute “luminaires and lighting fittings”.

SECTION XI.

Note 1 (u).

Delete and substitute :

  • “u) Articles of Chapter 96 (for example, brushes, travel sets for sewing, slide fasteners, typewriter ribbons, sanitary towels (pads) and tampons, napkins (diapers) and napkin liners); or”.

SECTION XI.

New Note 15.

Insert the following new Note 15 :

  • “15. Subject to Note 1 to Section XI, textiles, garments and other textile articles, incorporating chemical, mechanical or electronic components for additional functionality, whether incorporated as built-in components or within the fibre or fabric, are classified in their respective headings in Section XI provided that they retain the essential character of the goods of this Section.”.

Subheading 5501.10.

Delete and substitute :

- Of nylon or other polyamides :

5501.11

-- Of aramids

5501.19

-- Other”.

CHAPTER 56.

Note 1 (f).

Delete and substitute :

  • “f) Sanitary towels (pads) and tampons, napkins (diapers) and napkin liners and similar articles of heading 96.19.”.

Heading 57.03.

Delete and substitute :

57.03

Carpets and other textile floor coverings (including turf), tufted, whether or not made up.

5703.10

- Of wool or fine animal hair

 

- Of nylon or other polyamides :

5703.21

-- Turf

5703.29

-- Other

 

- Of other man-made textile materials :

5703.31

-- Turf

5703.39

-- Other

5703.90

- Of other textile materials”.

CHAPTER 58.

Subheadings 5802.1 to 5802.19.

Delete and substitute :

“5802.10

- Terry towelling and similar woven terry fabrics, of cotton”.

CHAPTER 59.

New Note 3.

Insert the following new Note 3 :

  • “3. For the purposes of heading 59.03, “textile fabrics laminated with plastics” means products made by the assembly of one or more layers of fabrics with one or more sheets or film of plastics which are combined by any process that bonds the layers together, whether or not the sheets or film of plastics are visible to the naked eye in the cross-section.”.

Renumber current Notes 3 to 7 as Notes 4 to 8.

CHAPTER 59.

Present Note 7 (a) (iii) (renumbered Note 8 (a) (iii)).

Delete and substitute :

  • “(iii) Filtering or straining cloth of a kind used in oil presses or the like, of textile material or of human hair;”.

Heading 59.11. Heading text.

Delete “Note 7” and substitute “Note 8”.

Subheading 5911.40. Subheading text.

Delete and substitute :

“5911.40

- Filtering or straining cloth of a kind used in oil presses or the like, including that of human hair”.

CHAPTER 61.

Note 4.

Delete and substitute :

  • “4. Headings 61.05 and 61.06 do not cover garments with pockets below the waist, with a ribbed waistband or other means of tightening at the bottom of the garment, or garments having an average of less than 10 stitches per linear centimeter in each direction counted on an area measuring at least 10 cm x 10 cm. Heading 61.05 does not cover sleeveless garments.

    “Shirts” and “shirt-blouses” are garments designed to cover the upper part of the body, having long or short sleeves and a full or partial opening starting at the neckline. “Blouses” are loose-fitting garments also designed to cover the upper part of the body but may be sleeveless and with or without an opening at the neckline. “Shirts”, “shirt-blouses” and “blouses” may also have a collar.”.

Subheading 6116.10.

Delete and substitute :

“6116.10

- Impregnated, coated, covered or laminated with plastics or rubber”.

CHAPTER 62.

New Note 4.

Insert the following new Note 4 :

  • “4. Headings 62.05 and 62.06 do not cover garments with pockets below the waist, with a ribbed waistband or other means of tightening at the bottom of the garment. Heading 62.05 does not cover sleeveless garments.

    “Shirts” and “shirt-blouses” are garments designed to cover the upper part of the body, having long or short sleeves and a full or partial opening starting at the neckline. “Blouses” are loose-fitting garments also designed to cover the upper part of the body but may be sleeveless and with or without an opening at the neckline. “Shirts”, “shirt-blouses” and “blouses” may also have a collar.”.

Renumber present Notes 4 to 9 as Notes 5 to 10, respectively.

Heading 62.01.

Delete and substitute :

62.01

Men’s or boys’ overcoats, car-coats, capes, cloaks, anoraks (including ski-jackets), wind-cheaters, wind- jackets and similar articles, other than those of heading 62.03.

6201.20

- Of wool or fine animal hair

6201.30

- Of cotton

6201.40

- Of man-made fibres

6201.90

- Of other textile materials”.

Heading 62.02.

Delete and substitute :

62.02

Women’s or girls’ overcoats, car-coats, capes, cloaks, anoraks (including ski-jackets), wind-cheaters, wind-jackets and similar articles, other than those of heading 62.04.

6202.20

- Of wool or fine animal hair

6202.30

- Of cotton

6202.40

- Of man-made fibres

6202.90

- Of other textile materials”.

Subheading 6210.20.

Delete and substitute :

“6210.20

- Other garments, of the type described in heading 62.01”.

Subheading 6210.30.

Delete and substitute :

“6210.30

- Other garments, of the type described in heading 62.02”.

Heading 63.06. Heading text.

Delete and substitute :

63.06

 

Tarpaulins, awnings and sunblinds; tents (including temporary canopies and similar articles); sails for boats, sailboards or landcraft; camping goods.”.

Subheading 6306.2.

Delete and substitute :

- Tents (including temporary canopies and similar articles) :”.

CHAPTER 68.

Note 1 (k).

Delete “lamps and lighting fittings” and substitute “luminaires and lighting fittings”.

Subheading 6802.10.

Delete and substitute :

“6802.10

- Tiles, cubes and similar articles, whether or not rectangular (including square), the largest face of which is capable of being enclosed in a square the side of which is less than 7 cm; artificially coloured granules, chippings and powder”.

Subheadings 6812.92 and 6812.93.

Delete these subheadings.

Subheading 6815.10.

Delete and substitute :

- Carbon fibres; articles of carbon fibres for non-electrical uses; other articles of graphite or other carbon for non-electrical uses :

6815.11

-- Carbon fibres

6815.12

-- Fabrics of carbon fibres

6815.13

-- Other articles of carbon fibres

6815.19

-- Other”.

Subheading 6815.91.

Delete and substitute :

“6815.91

-- Containing magnesite, magnesia in the form of periclase, dolomite including in the form of dolime, or chromite”.

CHAPTER 69.

Note 1.

Delete and substitute :

  • “1. This Chapter applies only to ceramic products which have been fired after shaping:

    • a) Headings 69.04 to 69.14 apply only to such products other than those classifiable in headings 69.01 to 69.03;

    • b) Articles heated to temperatures less than 800 °C for purposes such as curing of resins, accelerating hydration reactions, or for the removal of water or other volatile components, are not considered to be fired. Such articles are excluded from Chapter 69; and

    • c) Ceramic articles are obtained by firing inorganic, non-metallic materials which have been prepared and shaped previously at, in general, room temperature. Raw materials comprise, inter alia, clays, siliceous materials including fused silica, materials with a high melting point, such as oxides, carbides, nitrides, graphite or other carbon, and in some cases binders such as refractory clays or phosphates.”

CHAPTER 69.

Note 2 (ij).

Delete “lamps and lighting fittings” and substitute “luminaires and lighting fittings”.

CHAPTER 69.

Heading 69.03. Heading text.

Delete and substitute :

69.03

Other refractory ceramic goods (for example, retorts, crucibles, muffles, nozzles, plugs, supports, cupels, tubes, pipes, sheaths, rods and slide gates), other than those of siliceous fossil meals or of similar siliceous earths.”.

Subheading 6903.10.

Delete and substitute :

“6903.10

- Containing, by weight, more than 50 % of free carbon”.

CHAPTER 70.

New Notes 1 (d) and 1 (e).

Insert the following new Notes 1 (d) and 1 (e) :

  • “d) Front windscreens (windshields), rear windows and other windows, framed, for vehicles of Chapters 86 to 88;

  • e) Front windscreens (windshields), rear windows and other windows, whether or not framed, incorporating heating devices or other electrical or electronic devices, for vehicles of Chapters 86 to 88;”.

Reletter items (d) to (g) as items (f) to (ij), respectively.

Present Note 1 (e) (renumbered Note 1 (g)).

Delete “Lamps and lighting fittings” and substitute “Luminaires and lighting fittings”.

Heading 70.01.

Delete and substitute :

70.01

7001.00

Cullet and other waste and scrap of glass, excluding glass from cathode ray tubes or other activated glass of heading 85.49; glass in the mass.”.

Heading 70.11. Heading text.

Delete “electric lamps, cathode-ray tubes or the like.” and substitute “electric lamps and light sources, cathode-ray tubes or the like.”.

Heading 70.19.

Delete and substitute :

70.19

Glass fibres (including glass wool) and articles thereof (for example, yarn, rovings, woven fabrics).

 

- Slivers, rovings, yarn and chopped strands and mats thereof :

7019.11

-- Chopped strands, of a length of not more than 50 mm

7019.12

-- Rovings

7019.13

-- Other yarn, slivers

7019.14

-- Mechanically bonded mats

7019.15

-- Chemically bonded mats

7019.19

-- Other

 

- Mechanically bonded fabrics :

7019.61

-- Closed woven fabrics of rovings

7019.62

-- Other closed fabrics of rovings

7019.63

-- Closed woven fabrics, plain weave, of yarns, not coated or laminated

7019.64

-- Closed woven fabrics, plain weave, of yarns, coated or laminated

7019.65

-- Open woven fabrics of a width not exceeding 30 cm

7019.66

-- Open woven fabrics of a width exceeding 30 cm

7019.69

-- Other

 

- Chemically bonded fabrics :

7019.71

-- Veils (thin sheets)

7019.72

-- Other closed fabrics

7019.73

-- Other open fabrics

7019.80

- Glass wool and articles of glass wool

7019.90

- Other”.

Subheading 7104.20.

Delete and substitute :

- Other, unworked or simply sawn or roughly shaped :

7104.21

-- Diamonds

7104.29

-- Other”.

Subheading 7104.90.

Delete and substitute :

- Other :

7104.91

-- Diamonds

7104.99

-- Other”.

Heading 71.12. Heading text.

Delete and substitute :

71.12

Waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal other than goods of heading 85.49.”.

SECTION XV.

Note 1 (k).

Delete “lamps and lighting fittings” and substitute “luminaires and lighting fittings”.

SECTION XV.

Note 2 (a).

Delete and substitute :

  • “a) Articles of heading 73.07, 73.12, 73.15, 73.17 or 73.18 and similar articles of other base metal, other than articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences (heading 90.21);”.

SECTION XV.

Note 7. First paragraph.

Delete “under the Interpretative Rules” and substitute “under the General Interpretative Rules”.

SECTION XV.

Note 8 (a).

Delete and substitute :

  • “a) Waste and scrap

    • (i) All metal waste and scrap;

    • (ii) Metal goods definitely not usable as such because of breakage, cutting-up, wear or other reasons.”.

SECTION XV.

New Note 9.

Insert the following new Note 9 to Section XV :

  • “9. For the purposes of Chapters 74 to 76 and 78 to 81, the following expressions have the meanings hereby assigned to them :

    • a) Bars and rods

      Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

      Wire-bars and billets of Chapter 74 with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of heading 74.03. This provision applies mutatis mutandis to the products of Chapter 81.

    • b) Profiles

      Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

    • c) Wire

      Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross-section exceeds one-tenth of the width.

    • d) Plates, sheets, strip and foil

      Flat-surfaced products (other than the unwrought products of heading 80.01), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are :

      • of rectangular (including square) shape with a thickness not exceeding one-tenth of the width;

      • of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

      Headings for plates, sheets, strip, and foil apply, inter alia, to plates, sheets, strip, and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

    • (e) Tubes and pipes

      Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.”.

CHAPTER 74.

Notes 1 (d) to 1(h).

Delete these Notes.

Subheadings 7419.10.

Delete this subheading.

Subheadings 7419.9 to 7419.99.

Delete and substitute :

“7419.2

- Cast, moulded, stamped or forged, but not further worked

7419.80

- Other”.

CHAPTER 75.

Note 1.

Delete this Note.

CHAPTER 75.

Subheading Note 2.

Delete “Chapter Note 1 (c)” and substitute “Note 9 (c) to Section XV”.

CHAPTER 76.

Note 1.

Delete this Note.

CHAPTER 76.

Subheading Note 2.

Delete “Chapter Note 1 (c)” and substitute “Note 9 (c) to Section XV”.

CHAPTER 78.

Note 1.

Delete this Note.

CHAPTER 79.

Note 1.

Delete this Note.

CHAPTER 80.

Note 1.

Delete this Note.

CHAPTER 81.

Subheading Note 1.

Delete this Note.

Subheading 8103.90.

Delete and substitute :

- Other :

8103.91

-- Crucibles

8103.99

-- Other”.

Heading 81.06.

Delete and substitute :

81.06

Bismuth and articles thereof, including waste and scrap.

8106.10

- Containing more than 99.99 % of bismuth, by weight

8106.90

- Other”.

Heading 81.07.

Delete this heading.

Subheadings 8109.20 to 8109.90.

Delete and substitute :

- Unwrought zirconium; powders :

8109.21

-- Containing less than 1 part hafnium to 500 parts zirconium by weight

8109.29

-- Other

 

- Waste and scrap :

8109.31

-- Containing less than 1 part hafnium to 500 parts zirconium by weight

8109.39

-- Other

 

- Other :

8109.91

-- Containing less than 1 part hafnium to 500 parts zirconium by weight

8109.99

-- Other”.

Heading 81.12. Heading text.

Delete and substitute :

81.12

Beryllium, chromium, hafnium, rhenium, thallium, cadmium, germanium, vanadium, gallium, indium and niobium (columbium), articles of these metals, including waste and scrap.”.

New subheadings 8112.3 to 8112.49.

Insert the following new subheadings :

- Hafnium :

8112.31

-- Unwrought; waste and scrap; powders

8112.39

-- Other

 

- Rhenium :

8112.41

-- Unwrought; waste and scrap; powders

8112.49

-- Other”.

New subheadings 8112.6 to 8112.69.

Insert the following new subheadings :

- Cadmium :

8112.61

-- Waste and scrap

8112.69

-- Other”.

SECTION XVI.

Note 2 (b). Second sentence.

Delete and substitute :

“However, parts which are equally suitable for use principally with the goods of headings 85.17 and 85.25 to 85.28 are to be classified in heading 85.17, and parts which are suitable for use solely or principally with the goods of heading 85.24 are to be classified in heading 85.29;”.

New Note 6.

Insert the following new Note 6 :

  • “6.

    • A) Throughout the Nomenclature, the expression “electrical and electronic waste and scrap” means electrical and electronic assemblies, printed circuit boards, and electrical or electronic articles that :

      • (i) have been rendered unusable for their original purposes by breakage, cutting-up or other processes or are economically unsuitable for repair, refurbishment or renovation to render them fit for their original purposes; and

      • (ii) are packaged or shipped in a manner not intended to protect individual articles from damage during transportation, loading and unloading operations.

    • B) Mixed consignments of “electrical and electronic waste and scrap” and other waste and scrap are to be classified in heading 85.49.

    • C) This Section does not cover municipal waste, as defined in Note 4 to Chapter 38.”.

CHAPTER 84.

Note 2.

Delete and substitute :

  • “2. Subject to the operation of Note 3 to Section XVI and subject to Note 9 to this Chapter, a machine or appliance which answers to a description in one or more of the headings 84.01 to 84.24, or heading 84.86 and at the same time to a description in one or more of the headings 84.25 to 84.80 is to be classified under the appropriate heading of the former group or under heading 84.86, as the case may be, and not the latter group.

    • A) Heading 84.19 does not, however, cover :

      • (i) Germination plant, incubators or brooders (heading 84.36);

      • (ii) Grain dampening machines (heading 84.37);

      • (iii) Diffusing apparatus for sugar juice extraction (heading 84.38);

      • (iv) Machinery for the heat-treatment of textile yarns, fabrics or made up textile articles (heading 84.51); or

      • (v) Machinery or plant, designed for a mechanical operation, in which a change of temperature, even if necessary, is subsidiary.

    • B) Heading 84.22 does not cover :

      • (i) Sewing machines for closing bags or similar containers (heading 84.52); or

      • (ii) Office machinery of heading 84.72.

    • C) Heading 84.24 does not cover :

      • (i) Ink-jet printing machines (heading 84.43); or

      • (ii) Water-jet cutting machines (heading 84.56).”.

New Note 5.

Insert the following New Note 5 :

  • “5. For the purposes of heading 84.62, a “slitting line” for flat products is a processing line composed of an uncoiler, a coil flattener, a slitter and a recoiler. A “cut-to-length line” for flat products is a processing line composed of an uncoiler, a coil flattener, and a shear.”.

Renumber present Notes 5 to 8 as 6 to 9, respectively.

Present Note 5 (D) (renumbered Note 6 (D)).

Delete “Note 5 (C)” and substitute “Note 6 (C)”.

New Note 10.

Insert the following new Note 10 :

  • “10. For the purposes of heading 84.85, the expression “additive manufacturing” (also referred to as 3D printing) means the formation of physical objects, based on a digital model, by the successive addition and layering, and consolidation and solidification, of material (for example, metal, plastics or ceramics).

    Subject to Note 1 to Section XVI and Note 1 to Chapter 84, machines answering to the description in heading 84.85 are to be classified in that heading and in no other heading of the Nomenclature.”

Renumber present Note 9 as Note 11.

Present Note 9 (A) (renumbered Note 11 (A)).

Delete “Note 9 (a) and 9 (b)” and substitute “Note 12 (a) and (b)”.

Subheading Note 2.

Delete “Note 5 (C)” and substitute “Note 6 (C)”.

Heading 84.14. Heading text.

Delete “filters.” and substitute “filters; gas-tight biological safety cabinets, whether or not fitted with filters.”.

New subheading 8414.70.

Insert the following new subheading :

“8414.70

- Gas-tight biological safety cabinets”.

Subheading 8418.10.

Delete and substitute :

“8418.10

- Combined refrigerator-freezers, fitted with separate external doors or drawers, or combinations thereof ”.

New subheading 8419.12.

Insert the following new subheading :

“8419.12

-- Solar water heaters”.

Subheadings 8419.3 to 8419.39.

Delete and substitute :

- Dryers :

8419.33

-- Lyophilisation apparatus, freeze drying units and spray dryers

8419.34

-- Other, for agricultural products

8419.35

-- Other, for wood, paper pulp, paper or paperboard

8419.39

-- Other”.

New subheading 8421.32.

Insert the following new subheading :

“8421.32

-- Catalytic converters or particulate filters, whether or not combined, for purifying or filtering exhaust gases from internal combustion engines”.

New subheading 8428.70.

Insert the following new subheading :

“8428.70

- Industrial robots”.

Heading 84.38. Heading text.

Delete and substitute :

84.38

Machinery, not specified or included elsewhere in this Chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils.”.

Heading 84.62.

Delete and substitute :

84.62

Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw- benches); presses for working metal or metal carbides, not specified above.

 

- Hot forming machines for forging, die forging (including presses) and hot hammers :

8462.11

-- Closed die forging machines

8462.19

-- Other

 

- Bending, folding, straightening or flattening machines (including press brakes) for flat products :

8462.22

-- Profile forming machines

8462.23

-- Numerically controlled press brakes

8462.24

-- Numerically controlled panel benders

8462.25

-- Numerically controlled roll forming machines

8462.26

-- Other numerically controlled bending, folding, straightening or flattening machines

8462.29

-- Other

 

- Slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines :

8462.32

-- Slitting lines and cut-to-length lines

8462.33

-- Numerically controlled shearing machines

8462.39

-- Other

 

- Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines :

8462.42

-- Numerically controlled

8462.49

-- Other

 

- Machines for working tube, pipe, hollow section and bar (excluding presses) :

-- Numerically controlled

8462.51

 

8462.59

-- Other

 

- Cold metal working presses :

8462.61

-- Hydraulic presses

8462.62

-- Mechanical presses

8462.63

-- Servo-presses

8462.69

-- Other

8462.90

- Other”.

Subheading 8479.20.

Delete and substitute :

“8479.20

- Machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils”.

New subheading 8479.83.

Insert the following new subheading :

“8479.83

-- Cold isostatic presses”.

Subheadings 8482.40 and 8482.50.

Delete and substitute :

“8482.40

- Needle roller bearings, including cage and needle roller assemblies

8482.50

- Other cylindrical roller bearings, including cage and roller assemblies”.

New heading 84.85.

Insert the following new heading 84.85 :

“84.85

Machines for additive manufacturing.

8485.10

- By metal deposit

8485.20

- By plastics or rubber deposit

8485.30

- By plaster, cement, ceramics or glass deposit

8485.80

- Other

8485.90

- Parts”.

Heading 84.86. Heading text.

Delete “Note 9 (C)” and substitute “Note 11 (C)”.

Subheading 8486.40. Subheading text.

Delete “Note 9 (C)” and substitute “Note 11 (C)”.

CHAPTER 85.

New Note 5.

Insert the following new Note 5 :

  • “5. For the purposes of heading 85.17, the term “smartphones” means telephones for cellular networks, equipped with a mobile operating system designed to perform the functions of an automatic data processing machine such as downloading and running multiple applications simultaneously, including third-party applications, and whether or not integrating other features such as digital cameras and navigational aid systems.”.

Renumber present Note 5 as Note 6.

New Note 7.

Insert the following new Note 7 :

  • “7. For the purposes of heading 85.24, “flat panel display modules” refer to devices or apparatus for the display of information, equipped at a minimum with a display screen, which are designed to be incorporated into articles of other headings prior to use. Display screens for flat panel display modules include, but are not limited to, those which are flat, curved, flexible, foldable or stretchable in form. Flat panel display modules may incorporate additional elements, including those necessary for receiving video signals and the allocation of those signals to pixels on the display. However, heading 85.24 does not include display modules which are equipped with components for converting video signals (e.g., a scaler IC, decoder IC or application processer) or have otherwise assumed the character of goods of other headings.

    For the classification of flat panel display modules defined in this Note, heading 85.24 shall take precedence over any other heading in the Nomenclature.”.

Renumber present Notes 6 to 8 as Notes 8 to 10, respectively.

New Note 11.

Insert the following new Note 11 :

  • “11. For the purposes of heading 85.39, the expression “light-emitting diode (LED) light sources” covers :

    • a) “Light-emitting diode (LED) modules” which are electrical light sources based on light-emitting diodes (LED) arranged in electrical circuits and containing further elements like electrical, mechanical, thermal or optical elements. They also contain discrete active elements, discrete passive elements, or articles of heading 85.36 or 85.42 for the purposes of providing power supply or power control. Light-emitting diode (LED) modules do not have a cap designed to allow easy installation or replacement in a luminaire and ensure mechanical and electrical contact.

    • b) “Light-emitting diode (LED) lamps” which are electrical light sources containing one or more LED modules containing further elements like electrical, mechanical, thermal or optical elements. The distinction between light-emitting diode (LED) modules and light- emitting diode (LED) lamps is that lamps have a cap designed to allow easy installation or replacement in a luminaire and ensure mechanical and electrical contact.”.

Renumber present Note 9 as Note 12.

Present Note 9 (a) (renumbered Note 12 (a)). Delete and substitute :

  • “a)

    • (i) “Semiconductor devices” are semiconductor devices the operation of which depends on variations in resistivity on the application of an electric field or semiconductor-based transducers.

      Semiconductor devices may also include assembly of plural elements, whether or not equipped with active and passive device ancillary functions.

      “Semiconductor-based transducers” are, for the purposes of this definition, semiconductor-based sensors, semiconductor-based actuators, semiconductor-based resonators and semiconductor-based oscillators, which are types of discrete semiconductor-based devices, which perform an intrinsic function, which are able to convert any kind of physical or chemical phenomena or an action into an electrical signal or an electrical signal into any type of physical phenomenon or an action.

      All the elements in semiconductor-based transducers are indivisibly combined, and may also include necessary materials indivisibly attached, that enable their construction or function.

      The following expressions mean :

      • 1) “Semiconductor-based” means built or manufactured on a semiconductor substrate or made of semiconductor materials, manufactured by semiconductor technology, in which the semiconductor substrate or material plays a critical and unreplaceable role of transducer function and performance, and the operation of which is based on semiconductor properties including physical, electrical, chemical and optical properties.

      • 2) “Physical or chemical phenomena” relate to phenomena, such as pressure, acoustic waves, acceleration, vibration, movement, orientation, strain, magnetic field strength, electric field strength, light, radioactivity, humidity, flow, chemicals concentration, etc.

      • 3) “Semiconductor-based sensor” is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of detecting physical or chemical quantities and converting these into electric signals caused by resulting variations in electric properties or displacement of a mechanical structure.

      • 4) “Semiconductor-based actuator” is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of converting electric signals into physical movement.

      • 5) “Semiconductor-based resonator” is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures in response to an external input.

      • 6) “Semiconductor-based oscillator” is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures.

    • (ii) “Light-emitting diodes (LED)” are semiconductor devices based on semiconductor materials which convert electrical energy into visible, infra-red or ultra-violet rays, whether or not electrically connected among each other and whether or not combined with protective diodes. Light-emitting diodes (LED) of heading 85.41 do not incorporate elements for the purposes of providing power supply or power control;”.

Present Note 9 (b) (iv) 3. (a) (renumbered Note 12 (b) (iv) 3. (a)).

Delete and substitute :

  • “3.

    • a) „Silicon-based sensors” consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of detecting physical or chemical phenomena and transducing these into electric signals, caused by resulting variations in electric properties or displacement of a mechanical structure. “Physical or chemical phenomena” relates to phenomena, such as pressure, acoustic waves, acceleration, vibration, movement, orientation, strain, magnetic field strength, electric field strength, light, radioactivity, humidity, flow, chemicals concentration, etc.”.

Present Note 10.

Delete this Note.

Chapter 85. Subheading Note. Title.

Delete and substitute :

Subheading Notes.”.

New Subheading Notes 1 to 3.

Insert the following new Subheading Notes 1 to 3 :

  • “1. Subheading 8525.81 covers only high-speed television cameras, digital cameras and video camera recorders having one or more of the following characteristics :

    • writing speed exceeding 0.5 mm per microsecond;

    • time resolution 50 nanoseconds or less;

    • frame rate exceeding 225,000 frames per second.

  • 2. In respect of subheading 8525.82, radiation-hardened or radiation-tolerant television cameras, digital cameras and video camera recorders are designed or shielded to enable operation in a high-radiation environment.

    These cameras are designed to withstand a total radiation dose of at least 50 × 103 Gy(silicon) (5 × 106 RAD (silicon)), without operational degradation.

  • 3. Subheading 8525.83 covers night vision television cameras, digital cameras and video camera recorders which use a photocathode to convert available light to electrons, which can be amplified and converted to yield a visible image. This subheading excludes thermal imaging cameras (generally subheading 8525.89).”.

Renumber present Subheading Note 1 as Subheading Note 4.

New Subheading Note 5.

Insert the following new Subheading Note 5 :

  • “5. For the purposes of subheadings 8549.11 to 8549.19, “spent primary cells, spent primary batteries and spent electric accumulators” are those which are neither usable as such because of breakage, cutting-up, wear or other reasons, nor capable of being recharged.”.

Subheading 8501.3.

Delete and substitute :

- Other DC motors; DC generators, other than photovoltaic generators :”.

Subheading 8501.6.

Delete and substitute :

- AC generators (alternators), other than photovoltaic generators :”.

New subheadings 8501.7 to 8501.80.

Insert the following new subheadings :

- Photovoltaic DC generators :

8501.71

-- Of an output not exceeding 50 W

8501.72

-- Of an output exceeding 50 W

8501.80

- Photovoltaic AC generators”.

Subheading 8507.40.

Delete this subheading.

Subheading 8514.10.

Delete and substitute :

- Resistance heated furnaces and ovens :

8514.11

-- Hot isostatic presses

8514.19

-- Other”.

Subheading 8514.30.

Delete and substitute :

- Other furnaces and ovens :

8514.31

-- Electron beam furnaces

8514.32

-- Plasma and vacuum arc furnaces

8514.39

-- Other”.

Heading 85.17. Heading text.

Delete “telephones” and substitute “smartphones and other telephones”.

Subheading 8517.1. Subheading text.

Delete “telephones” and substitute “smartphones and other telephones”.

Subheading 8517.12.

Delete and substitute :

“8517.13

-- Smartphones

8517.14

-- Other telephones for cellular networks or for other wireless networks”.

Subheading 8517.70.

Delete and substitute :

- Parts :

8517.71

-- Aerials and aerial reflectors of all kinds; parts suitable for use therewith

8517.79

-- Other”.

Subheading 8519.50.

Delete this subheading.

New heading 85.24.

Insert the following new heading :

85.24

Flat panel display modules, whether or not incorporating touch- sensitive screens.

 

- Without drivers or control circuits :

8524.11

- Of liquid crystals

8524.12

-- Of organic light-emitting diodes (OLED)

8524.19

-- Other

 

- Other :

8524.91

-- Of liquid crystals

8524.92

-- Of organic light-emitting diodes (OLED)

8524.99

-- Other”.

Subheading 8525.80.

Delete and substitute :

- Television cameras, digital cameras and video camera recorders :

8525.81

-- High-speed goods as specified in Subheading Note 1 to this Chapter

8525.82

-- Other, radiation-hardened or radiation-tolerant goods as specified in Subheading Note 2 to this Chapter

8525.83

-- Other, night vision goods as specified in Subheading Note 3 to this Chapter

8525.89

-- Other”.

Heading 85.29. Heading text.

Delete “85.25” and substitute “85.24”.

Heading 85.39. Heading text.

Delete “light-emitting diode (LED) lamps.” and substitute “light-emitting diode (LED) light sources.”.

Subheading 8539.50.

Delete and substitute :

- Light-emitting diode (LED) light sources :

8539.51

-- Light-emitting diode (LED) modules

8539.52

-- Light-emitting diode (LED) lamps”.

Heading 85.41. Heading text.

Delete and substitute :

85.41

Semiconductor devices (for example, diodes, transistors, semiconductor based transducers); photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light-emitting diodes (LED), whether or not assembled with other light-emitting diodes (LED); mounted piezo-electric crystals.”.

Subheadings 8541.40 and 8541.50.

Delete and substitute :

- Photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light- emitting diodes (LED) :

8541.41

-- Light-emitting diodes (LED)

8541.42

-- Photovoltaic cells not assembled in modules or made up into panels

8541.43

-- Photovoltaic cells assembled in modules or made up into panels

8541.49

-- Other

 

- Other semiconductor devices :

8541.51

-- Semiconductor-based transducers

8541.59

-- Other”.

New subheading 85.43.

Insert the following new subheading :

“8543.40

- Electronic cigarettes and similar personal electric vaporising devices”.

Heading 85.48.

Delete and substitute :

85.48

8548.00

Electrical parts of machinery or apparatus, not specified or included elsewhere in this Chapter.”.

New heading 85.49.

Insert the following new heading :

85.49

Electrical and electronic waste and scrap.

 

- Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators :

8549.11

-- Waste and scrap of lead-acid accumulators; spent lead-acid accumulators

8549.12

-- Other, containing lead, cadmium or mercury

8549.13

-- Sorted by chemical type and not containing lead, cadmium or mercury

8549.14

-- Unsorted and not containing lead, cadmium or mercury

8549.19

– Other of a kind used principally for the recovery of precious metal :

8549.21

-- Containing primary cells, primary batteries, electric accumulators, mercury-switches, glass from cathode ray tubes or other activated glass, or electrical or electronic components containing cadmium, mercury, lead or polychlorinated biphenyls (PCBs)

8549.29

-- Other

 

- Other electrical and electronic assemblies and printed circuit boards :

8549.31

-- Containing primary cells, primary batteries, electric accumulators, mercury-switches, glass from cathode ray tubes or other activated glass, or electrical or electronic components containing cadmium, mercury, lead or polychlorinated biphenyls (PCBs)

8549.39

-- Other

 

- Other :

8549.91

-- Containing primary cells, primary batteries, electric accumulators, mercury-switches, glass from cathode ray tubes or other activated glass, or electrical or electronic components containing cadmium, mercury, lead or polychlorinated biphenyls (PCBs)

8549.99

-- Other”.

SECTION XVII.

Note 2 (k).

Delete “Lamps and lighting fittings” and substitute “Luminaires and lighting fittings and parts thereof”.

CHAPTER 87.

New Subheading Note 1.

Insert the following new Subheading Note 1 :

Subheading Note.

  • 1. Subheading 8708.22 covers :

    • a) front windscreens (windshields), rear windows and other windows, framed; and

    • b) front windscreens (windshields), rear windows and other windows, whether or not framed, incorporating heating devices or other electrical or electronic devices,

      when suitable for use solely or principally with the motor vehicles of headings 87.01 to 87.05.”.

Subheading 8701.20.

Delete and substitute :

- Road tractors for semi-trailers :

8701.21

-- With only compression-ignition internal combustion piston engine (diesel or semi-diesel)

8701.22

-- With both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion

8701.23

-- With both spark-ignition internal combustion piston engine and electric motor as motors for propulsion

8701.24

-- With only electric motor for propulsion

8701.29

-- Other”.

Subheading 8702.30. Subheading text.

Delete “reciprocating”.

Subheading 8703.2. Subheading text.

Delete “reciprocating”.

Subheading 8703.40. Subheading text.

Delete “reciprocating”.

Subheading 8703.60. Subheading text.

Delete “reciprocating”.

Subheadings 8704.2 to 8704.32.

Delete and substitute :

- Other, with only compression-ignition internal combustion piston engine (diesel or semi-diesel) :

8704.21

-- g.v.w. not exceeding 5 tonnes

8704.22

-- g.v.w. exceeding 5 tonnes but not exceeding 20 tonnes

8704.23

-- g.v.w. exceeding 20 tonnes

 

- Other, with only spark-ignition internal combustion piston engine :

8704.31

-- g.v.w. not exceeding 5 tonnes

8704.32

-- g.v.w. exceeding 5 tonnes

 

- Other, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion :

8704.41

-- g.v.w. not exceeding 5 tonnes

8704.42

-- g.v.w. exceeding 5 tonnes but not exceeding 20 tonnes

8704.43

-- g.v.w. exceeding 20 tonnes

 

- Other, with both spark-ignition internal combustion piston engine and electric motor as motors for propulsion :

8704.51

-- g.v.w. not exceeding 5 tonnes

8704.52

-- g.v.w. exceeding 5 tonnes

8704.60

- Other with only electric motor for propulsion”.

New subheading 8708.22.

Insert the following new subheading :

“8708.22

-- Front windscreens (windshields), rear windows and other windows specified in Subheading Note 1 to this Chapter”.

Subheading 8711.10. Subheading text.

Delete “reciprocating”.

Subheading 8711.20. Subheading text.

Delete “reciprocating”.

Subheading 8711.30. Subheading text.

Delete “reciprocating”.

Subheading 8711.40. Subheading text.

Delete “reciprocating”.

Subheading 8711.50. Subheading text.

Delete “reciprocating”.

CHAPTER 88.

New Note 1.

Insert the following new Note 1 :

  • “1. For the purposes of this Chapter, the expression “unmanned aircraft” means any aircraft, other than those of heading 88.01, designed to be flown without a pilot on board. They may be designed to carry a payload or equipped with permanently integrated digital cameras or other equipment which would enable them to perform utilitarian functions during their flight.

    The expression “unmanned aircraft”, however, does not cover flying toys, designed solely for amusement purposes (heading 95.03).”.

Chapter 88. Subheading Note. Title.

Delete and substitute :

Subheading Notes.”.

CHAPTER 88.

New Subheading Note 2.

Insert the following new Subheading Note 2 :

  • “2. For the purposes of subheadings 8806.21 to 8806.24 and 8806.91 to 8806.94, the expression “maximum take-off weight“ means the maximum weight of the machine in normal flying order, at take-off, including the weight of payload, equipment and fuel.”.

Heading 88.02. Heading text.

Delete “aircraft” and substitute “aircraft, except unmanned aircraft of heading 88.06”.

Heading 88.03.

Delete this heading.

New Heading 88.06.

Insert the following new heading :

88.06

Unmanned aircraft.

8806.10

- Designed for the carriage of passengers

 

- Other, for remote-controlled flight only :

8806.21

-- With maximum take-off weight not more than 250 g

8806.22

-- With maximum take-off weight more than 250 g but not more than 7 kg

8806.23

-- With maximum take-off weight more than 7 kg but not more than 25 kg

8806.24

-- With maximum take-off weight more than 25 kg but not more than 150 kg

8806.29

-- Other

 

- Other :

8806.91

-- With maximum take-off weight not more than 250 g

8806.92

-- With maximum take-off weight more than 250 g but not more than 7 kg

8806.93

-- With maximum take-off weight more than 7 kg but not more than 25 kg

8806.9

-- With maximum take-off weight more than 25 kg but not more than 150 kg

8806.99

-- Other”.

New Heading 88.07.

Insert the following new heading 88.07 :

88.07

Parts of goods of heading 88.01, 88.02 or 88.06.

8807.10

- Propellers and rotors and parts thereof

8807.20

- Under-carriages and parts thereof

8807.30

- Other parts of airplanes, helicopters or unmanned aircraft

8807.90

- Other”.

Subheadings 8903.10 to 8903.99.

Delete and substitute :

- Inflatable (including rigid hull inflatable) boats :

8903.11

-- Fitted or designed to be fitted with a motor, unladen (net) weight (excluding the motor) not exceeding 100 kg

8903.12

-- Not designed for use with a motor and unladen (net) weight not exceeding 100 kg

8903.19

-- Other

 

- Sailboats, other than inflatable, with or without auxiliary motor :

8903.21

-- Of a length not exceeding 7.5 m

8903.22

-- Of a length exceeding 7.5 m but not exceeding 24 m

8903.23

-- Of a length exceeding 24 m

 

- Motorboats, other than inflatable, not including outboard motorboats :

8903.31

-- Of a length not exceeding 7.5 m

8903.32

-- Of a length exceeding 7.5 m but not exceeding 24 m

8903.33

-- Of a length exceeding 24 m

 

- Other :

8903.93

-- Of a length not exceeding 7.5 m

8903.99

-- Other”.

CHAPTER 90.

Note 1 (f).

Delete and substitute :

  • “f) Parts of general use, as defined in Note 2 to Section XV, of base metal (Section XV) or similar goods of plastics (Chapter 39); however, articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences are to be classified in heading 90.21;”.

Subheadings 9006.51 and 9006.52.

Delete these subheadings.

Subheading 9006.53.

Delete and substitute :

“9006.53

-- For roll film of a width of 35 mm.”.

Heading 90.13. Heading text.

Delete and substitute :

90.13

Lasers, other than laser diodes; other optical appliances and instruments, not specified or included elsewhere in this Chapter.”.

Heading 90.22. Heading text.

Delete “or gamma” and substitute “, gamma or other ionising”.

Subheading 9022.2. Subheading text.

Delete “or gamma” and substitute “, gamma or other ionising”.

Subheading 9027.80.

Delete and substitute :

- Other instruments and apparatus :

9027.81

-- Mass spectrometers

9027.89

-- Other”.

Subheading 9030.3. Subheading text.

Delete “power :” and substitute “power (other than those for measuring or checking semiconductor wafers or devices) :”.

Subheading 9030.82.

Delete and substitute :

“9030.82

-- For measuring or checking semiconductor wafers or devices (including integrated circuits)”.

Subheading 9031.41.

Delete and substitute :

“9031.41

-- For inspecting semiconductor wafers or devices (including integrated circuits) or for inspecting photomasks or reticles used in manufacturing semiconductor devices (including integrated circuits)”.

Subheading 9114.10.

Delete this subheading.

CHAPTER 94.

TITLE OF CHAPTER 94.

Delete “lamps and lighting fittings” and substitute “luminaires and lighting fittings”.

Note 1 (f).

Delete “Lamps or lighting fittings” and substitute “Lamps or light sources and parts thereof”.

Note 1 (l). First line.

Delete “lamps or lighting fittings” and substitute “luminaires and lighting fittings”.

Third line.

Delete “electric garland” and substitute “lighting strings”.

Note 4. New second paragraph.

Add the following new second paragraph :

“Prefabricated buildings include “modular building units“ of steel, normally presented in the size and shape of a standard shipping container, but substantially or completely pre-fitted internally. Such modular building units are normally designed to be assembled together to form permanent buildings.”.

Subheading 9401.30.

Delete and substitute :

- Swivel seats with variable height adjustment :

9401.31

-- Of wood

9401.39

-- Other”.

Subheading 9401.40.

Delete and substitute :

- Seats other than garden seats or camping equipment, convertible into beds :

9401.41

-- Of wood

9401.49

-- Other”.

Subheading 9401.90.

Delete and substitute :

- Parts :

9401.91

-- Of wood

9401.99

-- Other”.

Subheading 9403.90.

Delete and substitute :

- Parts :

9403.91

-- Of wood

9403.99

-- Other”.

New subheading 9404.40.

Insert the following new subheading :

“9404.40

- Quilts, bedspreads, eiderdowns and duvets (comforters)”.

Heading 94.05. Heading text.

Delete “Lamps and lighting fittings” and substitute “Luminaires and lighting fittings”.

Subheadings 9405.10 to 9405.60.

Delete and substitute :

- Chandeliers and other electric ceiling or wall lighting fittings, excluding those of a kind used for lighting public open spaces or thoroughfares :

9405.11

-- Designed for use solely with light-emitting diode (LED) light sources

9405.19

-- Other

 

- Electric table, desk, bedside or floor-standing luminaires :

9405.21

-- Designed for use solely with light-emitting diode (LED) light sources

9405.29

-- Other

 

- Lighting strings of a kind used for Christmas trees :

9405.31

-- Designed for use solely with light-emitting diode (LED) light sources

9405.39

-- Other

 

- Other electric luminaires and lighting fittings :

9405.41

-- Photovoltaic, designed for use solely with light-emitting diode (LED) light sources

9405.42

-- Other, designed for use solely with light-emitting diode (LED) light sources

9405.49

-- Other

9405.50

- Non-electrical luminaires and lighting fittings

 

- Illuminated signs, illuminated name-plates and the like :

9405.61

-- Designed for use solely with light-emitting diode (LED) light sources

9405.69

-- Other”.

New subheading 9406.20.

Insert the following new subheading :

“9406.20

- Modular building units, of steel”.

CHAPTER 95.

New Note 1 (p).

Insert the following new exclusion Note 1 (p) :

  • “p) Unmanned aircraft (heading 88.06);”.

Reletter present items (p) to (w) as (q) to (x), respectively.

New Note 6.

Insert the following new Note 6 :

  • “6. For the purposes of heading 95.08:

    • a) The expression “amusement park rides” means a device or combination of devices or equipment that carry, convey, or direct a person or persons over or through a fixed or restricted course, including watercourses, or within a defined area for the primary purposes of amusement or entertainment. Such rides may be combined within an amusement park, theme park, water park or fairground. These amusement park rides do not include equipment of a kind commonly installed in residences or playgrounds;

    • b) The expression “water park amusements” means a device or combination of devices or equipment that are characterized by a defined area involving water, with no purposes built path. Water park amusements only include equipment designed specifically for water parks; and

    • c) The expression “fairground amusements” means games of chance, strength or skill, which commonly employ an operator or attendant and may be installed in permanent buildings or independent concession stalls. Fairground amusements do not include equipment of heading 95.04.

      This heading does not include equipment more specifically classified elsewhere in the Nomenclature.”.

Heading 95.04. Heading text.

Delete and substitute :

95.04

Video game consoles and machines, table or parlour games, including pintables, billiards, special tables for casino games and automatic bowling equipment, amusement machines operated by coins, bank notes, bank cards, tokens or by any other means of payment.”.

Heading 95.08.

Delete and substitute:

95.08

Travelling circuses and travelling menageries; amusement park rides and water park amusements; fairground amusements, including shooting galleries; travelling theatres.

9508.10

- Travelling circuses and travelling menageries

 

- Amusement park rides and water park amusements :

9508.21

-- Roller coasters

9508.22

-- Carousels, swings and roundabouts

9508.23

9508.24

-- Dodge’em cars

 

-- Motion simulators and moving theatres

9508.25

-- Water rides

9508.26

-- Water park amusements

9508.29

-- Other

9508.30

- Fairground amusements

9508.40

- Travelling theatres”.

CHAPTER 96.

Note 1 (k).

Delete “lamps and lighting fittings” and substitute “luminaires and lighting fittings”.

Subheading 9609.10.

Delete and substitute :

“9609.10

- Pencils and crayons, with leads encased in a sheath”.

Heading 96.17.

Delete and substitute :

96.17

9617.00

Vacuum flasks and other vacuum vessels, complete; parts thereof other than glass inners.”.

Heading 96.19.

Delete and substitute :

96.19

9619.00

Sanitary towels (pads) and tampons, napkins (diapers), napkin liners and similar articles, of any material.”.

CHAPTER 97.

New Note 2.

Insert the following new Note 2 :

  • “2. Heading 97.01 does not apply to mosaics that are mass-produced reproductions, casts or works of conventional craftsmanship of a commercial character, even if these articles are designed or created by artists.”.

Renumber present Notes 2 to 5 as Notes 3 to 6, respectively.

Heading 97.01.

Delete and substitute :

97.01

Paintings, drawings and pastels, executed entirely by hand, other than drawings of heading 49.06 and other than hand- painted or hand-decorated manufactured articles; collages, mosaics and similar decorative plaques.

 

- Of an age exceeding 100 years :

9701.21

-- Paintings, drawings and pastels

9701.22

-- Mosaics

9701.29

-- Other

 

- Other :

9701.91

-- Paintings, drawings and pastels

9701.92

-- Mosaics

9701.99

-- Other”.

Heading 97.02.

Delete and substitute :

97.02

Original engravings, prints and lithographs.

9702.10

- Of an age exceeding 100 years

9702.90

- Other”.

Heading 97.03.

Delete and substitute :

97.03

Original sculpture and statuary, in any material.

9703.10

- Of an age exceeding 100 years

9703.90

- Other”.

Heading 97.05.

Delete and substitute :

97.05

Collections and collectors’ pieces of archaeological, ethnographic, historical, zoological, botanical, mineralogical, anatomical, paleontological, or numismatic interest.

9705.10

- Collections and collectors’ pieces of archaeological, ethnographic or historical interest

 

- Collections and collectors’ pieces of zoological, botanical, mineralogical, anatomical or paleontological interest :

9705.21

-- Human specimens and parts thereof

9705.22

-- Extinct or endangered species and parts thereof

9705.29

-- Other

 

- Collections and collectors’ pieces of numismatic interest :

9705.31

-- Of an age exceeding 100 years

9705.39

-- Other”.

Heading 97.06.

Delete and substitute :

97.06

Antiques of an age exceeding 100 years.

9706.10

- Of an age exceeding 250 years

9706.90

- Other”.


D. PARLEMENT

De wijzigingen van 28 juni 2019 van de Bijlage bij het Verdrag behoeven ingevolge artikel 7, onderdeel f, van de Rijkswet goedkeuring en bekendmaking verdragen niet de goedkeuring van de Staten-Generaal.

G. INWERKINGTREDING

De bepalingen van de wijzigingen van 28 juni 2019 van de Bijlage bij het Verdrag zullen, ingevolge artikel 16, vierde lid, aanhef en onderdeel b, op 1 januari 2022 voor alle Verdragsluitende Partijen, waaronder het Koninkrijk der Nederlanden, in werking treden.

Wat betreft het Koninkrijk der Nederlanden, gelden de wijzigingen voor het gehele Koninkrijk.

Uitgegeven de vijftiende september 2021.

De Minister van Buitenlandse Zaken, S.A.M. KAAG


X Noot
1)

De Franse tekst is niet opgenomen.