Besluit van de Minister van Sociale Zaken en Werkgelegenheid van 19 april 2018, 2018-0000064042, tot aanwijzing CML B.V. inzake accreditatienorm ISO/IEC 17065:2012

De Minister van Sociale Zaken en Werkgelegenheid,

Gelezen het verzoekschrift van CML B.V. te Amsterdam van 19 maart 2018;

Overwegende, dat een EU-conformiteitsbeoordelingsinstantie moet voldoen aan de criteria voor aanwijzing, die zijn vermeld in artikel 7a van de Warenwet en artikel 11 van het Warenwetbesluit explosieveilig materieel 2016;

Overwegende, dat het verzoek van CML B.V. vergezeld gaat van accreditatienorm ISO/IEC 17065:2012 met certificaatnummer C640 van de Raad voor Accreditatie betreffende de onderzoeken en procedures waarvoor zij verzoekt aangewezen en aangemeld te worden;

Gelet op artikel 7a, eerste lid, van de Warenwet en artikel 11 het Warenwetbesluit explosieveilig materieel 2016.

Besluit:

Artikel 1

In deze beschikking wordt verstaan onder:

a. wet:

de Warenwet;

b. besluit:

het Warenwetbesluit explosieveilig materieel 2016;

c. explosieveilig materieel, apparaten van groep I en II, componenten, voorzieningen, richtlijn, EU-conformiteitsbeoordelingsinstantie:

hetgeen het besluit daaronder verstaat;

d. CML B.V.:

CML B.V., Hoogoorddreef 15, 1101 BA te Amsterdam, Kvk-nummer:67386717 en vestigingsnummer 000035932007.

Artikel 2

  • 1. CML B.V. wordt aangewezen als EU-conformiteitsbeoordelingsinstantie die bevoegd is tot het verrichten van keuringen en het afgeven van certificaten op basis van:

    Directive 2014/34/EU

    Equipment and protective systems intend for use in potentially explosive atmospheres

    Product / Product Group

    Module / article

    Conformity

    Assessment

    procedure

    Equipment category M1 of equipment-group I – electrical equipment and non-electrical equipment

    EU-type examination (module B)

    Annex III

    Conformity to type based on quality assurance of the production process (module D)

    Annex IV

    Conformity to type based on product verification (module F)

    Annex V

    Conformity based on unit verification (module G)

    Annex IX

    Equipment category 1 of equipment-group II, explosive atmosphere due to gases, vapours or mists – electrical equipment and non-electrical equipment

    EU-type examination (module B)

    Annex III

    Conformity to type based on quality assurance of the production process (module D)

    Annex IV

    Conformity to type based on product verification(module F)

    Annex V

    Conformity based on unit verification (module G)

    Annex IX

    Equipment category 1 of equipment-group II, explosive atmosphere due to air/dust mixtures – electrical equipment and non-electrical equipment

    EU-type examination (module B)

    Annex III

    Conformity to type based on quality assurance of the production process (module D)

    Annex IV

    Conformity to type based on product verification (module F)

    Annex V

    Conformity based on unit verification (module G)

    Annex IX

    Equipment category M2 of equipment-group I – electrical equipment

    EU-type examination (module B)

    Annex III

    Conformity to type based on internal production control plus supervised product testing (module C1)

    Annex VI

    Conformity to type based on product quality assurance (module E)

    Annex VII

    Conformity based on unit verification (module G)

    Annex IX

    Equipment category 2 of equipment-group II, explosive atmosphere due to air/dust mixture – electrical equipment

    EU-type examination (module B)

    Annex III

    Conformity to type based on internal production control plus supervised product testing (module C1)

    Annex VI

    Conformity to type based on product quality assurance (module E)

    Annex VII

    Conformity based on unit verification (module G)

    Annex IX

    Equipment category 2 of equipment-group II, explosive atmosphere due to gases, vapours or mists – electrical equipment

    EU-type examination (module B)

    Annex III

    Conformity to type based on internal production control plus supervised product testing (module C1)

    Annex VI

    Conformity to type based on product quality assurance (module E)

    Annex VII

    Conformity based on unit verification (module G)

    Annex IX

    Equipment category M2 of equipment-group I – non- electrical equipment

    Communication of technical documentation for internal production control

    Article 13, sub 1b-ii and Annex VIII

    Conformity based on unit verification (module G)

    Annex IX

    Equipment category 2 of equipment-group II, explosive atmosphere due to air/dust mixture – non- electrical equipment

    Communication of technical documentation for internal production control

    Article 13, sub 1b-ii and Annex VIII

    Conformity based on unit verification (module G)

    Annex IX

    Equipment category 2 of equipment-group II, explosive atmosphere due to gases, vapours or mists -non-electrical equipment

    Communication of technical documentation for internal production control

    Article 13, sub 1b-ii and Annex VIII

    Conformity based on unit verification (module G)

    Annex IX

    Equipment category 3 of equipment-group II

    Conformity based on unit verification (module G)

    Annex IX

    Protective systems

    EU-type examination (module B)

    Annex III

    Conformity to type based on quality assurance of the production process (module D)

    Annex IV

    Conformity to type based on product verification (module F)

    Annex V

    Conformity based on unit verification (module G)

    Annex IX

    Components

    EU-type examination (module B)

    Annex III

    Conformity to type based on quality assurance of the production process (module D)

    Annex IV

    Conformity to type based on product quality assurance (module E)

    Annex VII

    Conformity to type based on product verification (module F)

    Annex V

    Conformity to type based on internal production control plus supervised product testing (module C1)

    Annex VI

    Conformity based on unit verification (module G)

    Annex IX

  • 2. Indien de accreditatie voor het werkveld waarvoor de instantie is aangewezen, komt te vervallen, zal deze aanwijzing aldus worden geschorst, dat de instantie niet meer bevoegd is tot het uitvoeren van de desbetreffende werkzaamheden, maar wel verplicht is zorg te dragen voor de overdracht van de desbetreffende klantdossiers aan een door de klant te bepalen conformiteitsbeoordelingsinstantie waarmee hij een overeenkomst heeft afgesloten, dan wel, indien op het desbetreffende werkveld geen andere conformiteitsbeoordelingsinstantie werkzaam is, aan de Minister op een door hem te bepalen wijze.

  • 3. Deze aanwijzing kan worden ingetrokken, indien de instelling niet meer voldoet aan de aanwijzingscriteria die zijn vermeld in artikel 7a, eerste lid, van de wet, artikel 11 van het besluit of haar taken beëindigt. Het voornemen tot intrekking wordt tijdig kenbaar gemaakt.

Artikel 3

Deze beschikking treedt in werking de dag na publicatie in de Staatscourant waarin zij wordt geplaatst. Deze beschikking vervalt met ingang van 1 april 2023.

De Minister van Sociale Zaken en Werkgelegenheid, namens deze, L.M.N. Kroon Directeur Toezicht

Naar boven